Written on November 14th, 2009 by gbrewer4 shouts
Brutus Ten
This Brewtus Ten was built completely from 2″x2″ steel square tubing based on Lonie’s original plans. Let’s face it, if we didn’t need it for brewing, we could always use it as a car stand. This brew stand was built to last.
From left to right, our Brewtus Ten beer brewing system consists of a boil kettle, mash tun, and hot liquor tank. All three of which were created from modified kegs with tig welded fittings.
The boil kettle is quite simple. It consisted of a ball valve, dip tub, and a mash screen. I just toss whole hops into the boil and the mash screen filters them out. (more…)
Written on November 9th, 2009 by gbrewerone shout
Mash Tun Return
There has been lots of discussion as to the proper placement of the temperature probe in the mash tun. In fact, it took me three different placements to find one that works well. I, like you, want my mash temperature to be as stable as possible.
My temperature probe location is at the top of the kettle nearest the actual mash return. I wanted to know the actual temperature of the wort that is being returned into the kettle and not the temperature of the grain bed. With this setup, I have been able to regulate the temperature of my mash within one degree which is confirmed by the lower thermometer.
The heart of my system is the BCS-460 which allows me numerous options. I constantly recirculate the wort through a pump during mash. The mash tun resides above a propane burner which is connected to a Honeywell brand gas valve. I am not a big fan of the ASCO system since it lacks safety features. The gas valve is controlled by the BCS-460 based on the readings from the temperature probe. (more…)
